Please read all instructions carefully before installing Zilla® and NEX® products. The design and installation of the Zilla® and NEX® product lines should comply with all building codes and regulations. Improper installation of Zilla® products, beyond that which they were designed, may result in the product warranty being nullified. The packing slip is included with your system, please take time to familiarize yourself with this list and its components. Should any parts be missing or damaged, contact your local Zilla® vendor for replacement as soon as possible. It is the installer’s responsibility to comply with the following:
- All applicable local or national building codes, including any that may supersede this manual
- Ensuring that Zilla® and other products are appropriate for each particular installation and the installation environment
- Ensuring that the roof, its rafters, connections, and other structural support members are able to support the system under all code conditions using Zilla® parts and installer-supplied parts as specified by Zilla® (substitution of parts may void the warranty)
- Ensuring that lag screws or anchoring bolts have adequate pullout strength and shear capacities as installed
- Maintaining the waterproof integrity of the roof, including selection of appropriate flashing
- Ensuring safe installation of electrical components in the racking system
- Ensuring that correct and appropriate site specific design parameters are used in determining the anticipated design loading used for environmental variables, such as snow loading, maximum wind gusts, and topographic factors should be confirmed with local building officials or a licensed engineer (ask about Zilla's Engineering and Design Services).